EA05A Regulador de Voltaje para Generador Eléctrico

Read More

Regulador Automático de Voltaje para Generador R250

AVR R250  

R250 voltage regulator of a sealed electronic devices, by adjusting the excitation current in order to stabilize the output voltage of the brushless generator.

Technicial specification:
Voltage regulation:around ±0.5%
Voltage supply/sensing range 85 to 139V(50/60Hz)
Rapid response time(500ms) for a transient voltage variation amplitude of ±20% 

Read More

Regulador para Generador de 2 a 2.8KW (AVR)

Capacitor

250 V
220 uF

Conectores  6

4 en 1 

1 

1 

Read More

Regulador para Generador de 3 a 5KW (AVR)

Capacitor      

350 V             

360 uF           

 

Conectores 6

4 en 1 

1 

1 

Read More

Regulador Automático de Voltaje (AVR) Modelo: R448

SPECIFICATION  

 Normal AVR supply power, 2 auxiliary windings 

(X1, X2, and Z, Z2)

Shunt supply : 150 - 50/60Hz 

Rated overload current: 10A, 10s

Electronic built-in (overload, short circuit, and loss of sensing) protection: if excitation current raises over 10 amps for more then 10 seconds, excitation current will drops automatically to about 1A.

To reset AVR  protection, generator must be stopped (or by cutting supply voltage to the AVR) 

Protection of power inputs by fuses F1 

Voltege sensing: 5VA insulated transformer with input volge taps at:

Terminals 0-110V= 95 to 140V

Terminals 0-220 V = 170 to 260 V 

Terminals 0-380 V = 340 to 520 V 

Output voltage adjustment by using pot P2 

Other sensing voltages by using an adapting other transformers 

Current sensing (parallel operation) CT 2.5 VA class 1 secondary current xxx/1 (optiona).

Adjustment  of quadrature droop with pot P1 

Under-speed (U/F) and LAM protection: for knee frequency adjustable use P4.

Excitation over current adjustment use P5: 4.5 to 10A 

For 50/60 Hz (U/F) selection use jumper ST3.

SPECIAL APPLICATIONS 

 Field de- energizing 

Cutting excitation current is accomplished by switching off the supply power to AVR (1 lead on each auxiliary winding)

Contacts capacity : 10A. 250V AC 

This is the same connection used to reset internal protection of AVR. 

Read More

Regulador Automático de Voltaje (AVR) Modelo: M40FA640A/A

TECHNICAL DATA 

Precisione di regolazione: +/-0.5% a regime, per valori di tensione e carico nominali steady state conditions, for rated Voltage and PF 

Deriva Termica: +/- variazione di tensione per variazione T amb 50°C 

Voltage Drift: of voltage for 50 -3 Tamb change 

Tempo di risposta: 1 ciclo (20ms-16.6ms)

Response Time: 1 cycle (20ms- 16.6ms)

Temperatura di esercizio: -30°C / +70°C 

Operating Temperature :

Resistenza di campo eccitatrice: 3.5 (min) + 20 (max)

Exciter field resistance:

Dati di ingresso e uscita:

Input/output data:

- Tensione di alimentazione: 170-277V (50/60Hz)

-Supply voltage:

-Potenza di alimentazione: 1000 VA (max)

-Power supply:

-Potenza dissipata: 30 W (max)

-Power dissipated 

-Rilievo di tensione trifase: 170-270 / 380- 415 / 440- 480 V 

-Voltage sensing: (three or single phase sensing)

-Tensione di uscita (DC): 80V (max, servizio continuo)

-Output voltage (DC):

-Corrente di uscita (CD) 8A (max, servizio continuo)

-Output current (DC): (max, continuous)

-Corrente di uscita (DC):  15A (max, in forzamento 1 minuto)

-Output current (DC): (max 1 minute forcing) 

Read More

Regulador Automático de Voltaje (AVR) Modelo: AVC63-4

INTRODUCTION 

The AVC63-4 voltage regulator is an encapsulated electronic voltage regulator that controls the output of a brushless AC generator by regulating the current into the exciter field.

SPECIFICATION           AVC63-4 REGULATOR 

Sensing & power input    190-240 Vac 

Burden                              500 VA 

Output power- continuos 75 Vdc at 3.5 Adc (225w)

Output power - forcing (240 Vac input power) 105 Vdc at 5 Adc (525w)

Regulation                         1.0%

Remote voltage adjustment  range +/- 10% with 2000 ohm rheostat +/- 5% with 1000 ohm rheostat 

Fraquency compensation       adjustable 

Roll off frequency 54- 61 Hz for 60 Hz 45- 51 Hz for 50 Hz 

Operation    weight6.5 oz. 

Operating temperature -40°C to + 60° C    

Storage temperature -65°C to + 85°C 

Power dissipation 8 watts maximum 

Size 3.94" LX 2.66" W X 2.20:H 

Voltage buildup internal provisions forautomatic voltage build up from generator residual voltage as low as 10 Vac 

EMI suppression internal electromagnetic interference filter (EMI filter)

Read More