Regulador automático de voltaje (AVR) Modelo: MX341

Technical specification

Sensing Input 

Voltage 190-264V ac max, 1 phase, 2 wire 

Frequency  50-60 Hz nominal 

Power Input (PMG)

Voltage 140-220V ac max, 3 phas, 3 wire 

Current 3A/phase 

Frequency 100-120Hz nominal 

Output 

Voltage max 120V dc 

Current continuous 2.7 A

Intermittent 6A for 10 secs.

Resistance 15 ohms minimum 

Regulation 

 +/- 1%  (see note 1)

Thermal Drift 

 0.03% per °C change in AVR  ambient (note 2)

Soft start ram time 

 3 seconds 

Typical system response 

 AVR Response 10 ms 

Filed current to 90% 80 ms 

Machine Volts to 97% 300 ms 

 External voltage adjustment

 +/- 10% with 1 k ohm 1 watt trimmor (see note 3)

Under frequency protection 

 Set point 95% Hz (see note 4) 

Slope 170% down to 30 Hz 

 Unit power dissipation 

 12 watts maximum 

Analogue input 

 Maximum input +/- 5V dc (see note 5)

Sensitivity: 0.07 A for 5% droop OPF

Max. input: 0.33 A 

Over excitation protection 

 Set point 75 V dc 

Time delay 10 seconds (fixed)

 Environmental 

 Vibration  20-100 Hz 50mm/sec

100Hx - 2kHz 3.3g

Operating temperature -40 to +70°C

Relative humidity 0-70°C 95% (see note6)

Storage temperature -55 to +80°C

Notes 

1. With 4% engine governing.

2. After 10 minutes 

3. Applies to mod status D onwards. Generator de-rate may 

amply. Check with factory.

4. Factory set, semi-sealed, jumper selectable.

5. Any device connected to the analogue input must be fully 

floating (galvanically isolated from ground), with an 

insulation strenght of 500V ac

6. Non condensing.

Read More

Regulador automático de voltaje (AVR) Modelo: 12A

Features 

• > +/- 1% Regulation 
• 220/440 VAC Programmable Input 
• Rugged Compact Desingn 
• Whit Under Frequency Protection
• Soft Stars Voltage Ramping 
• EMI  Suppression 
• Built-in Hihg Capacity 10 Amp Fuse 

Specifications 

Sensinglnput voltge: 180~260VAC,1phase 2wire voltageBuild-up Residualvolts at AVR terminal>5VAC

Power Input voltage: 180~260VAC, 1phase2wire  External Volts Adjustment +/- with 1K watt trimmer

Output voltage: Max.90VDC@240VACinput  Sots start Ramp Time  2sec.

Current Continuous: 4A Unit Power Dissipation Max.8watt

Intermittent: 7A for 10SEE. EMI Supperssion  Internal Electromagnetic Interference Filtering

Resistance: Min.12 Max.100 Thermal. Drift 0.03%per C°chage in AVR ambient 

(Factory Settings): 50Hz system presents knee point at 45Hz

Volts Regulation>+/- 1% (with 4% engine governing)

 

Read More

Regulador automático de voltaje (AVR) Modelo: 8A

Features 

• > +/- 1% Regulation 
• 110/220/400 VAC Programmalble Input 
• Rugged Compact Design 
• With Under Frequency Protection 
• Soft  Start Voltage Ramping 
• EMI Suppression 
• Built- in Hihg Capacity 8 Amp Fuse 

Specifications 

Sensinglnput  voltage: 110/220/400VAC, 1phase2wire  voltageBuild-up  Resedualvolts at AVR terminal >5VAC

Power Input  voltage: 100~260VAC ,1phase 2wire external Volts Adjustment +/-7% whit 1K 1 watt trimmer 

Output voltage: Max.90 VDC@240VACinput Sotf Start Ramp Time 2sec.

Current Continuous: 3A Unit Power Dissipation Max.8Watt

Intermittent: 5A for 10SEE. EMI Suppression  Internal Electromagnetic Interference Filtering 

Resistance: Min.15 Max.100  Thermal. Drift 0.03%perC° change in AVR ambient 

Under Frequency Protection: 60Hz system presets knee point at 55Hz 

(Factory Setting) 50Hz system presents knee point at 45Hz 

Volts Regulation>1%(with 4% engine governing)

Read More

Regulador automático de voltaje (AVR) Modelo SX460

Technical spcification 

INPUT 

Voltage: 

jumper selectable 

95-132V ac or 

190-264 ac 

Frequency:

50-60 Hz nominal 

Phase: 1 

OUTPUT 

Voltage:Max 90 dc at 207V ac input Current:Continuous 4 A cd Intermittent 6 A for 10 secs Resistance:

15 ohms minimum 

REGULATION 

+/- 1.0% (see note 1)

THERMAL DRIFT 

0.05% per deg. C change in AVR ambient (note 2)

TYPICAL SYSTEM RESPONSE

AVR  Response  20ms 

Filed current to 90% 80 ms 

Machine Volts to 97% 300ms 

EXTERNAL VOLTAGE ADJUSTMENT 

+/-10% whit 1 k ohm 1 watt trimmer (see note 3)

UNDER FREQUENCY PROTECTION 

Set point 95% Hz (see note 4) 

Slope 170 % down to 30 Hz 

UNIT POWER DISSIPATION 

10 watts maximum 

BUILD UP VOLTAGE 

4 Volts @ AVR terminals 

ENVIRONMENTAL

Vibration: 

20-100 Hz 50mm/sec

100Hz 2kHz 3.3g

Operating temperature:

-40 to +70C

Relative Humidity:

0-70C 95% (see note 5)

Storage temperature:

-55 to +80C 

Read More

Regulador automático de voltaje (AVR) Modelo: AS440

Technical specification 

 SENSISING INPUT 

Voltage:

Jumper Selectable 

100- 130 Vac 1 phase or 

190-264 Vac 1 phase 

 Frequency: 50-60 Hz nominal 

  POWER INPUT

Voltage: 100-264 V ac 1 phase 

Frequency: 50-60 Hz nominal 

OUTPUT 

Voltage:  82 V d.c. @ 200 V a.c. 

Current:   continuous 4A (see note 1). transient 7.5A for 10 secs.

Resistance: 15 ohms min ( 10 ohms min whent input volts is less than 175 ac)

REGULATION 

+/- 1.0% (see note 2) 

THERMAL DRIFT 

.0.03%  per deg . C change in AVR  ambient (see note 3) 

TYPICAL SYSTEM RESPONSE 

AVR response  20 ms 

Filed current to 90%     80 ms 

Marchine Volts to 97%  300 ms 

EXTERNAL VOLTAGE ADJUSTMENT 

+/-10% winth 1 k ohm 1 watt trimmer (see note 4 ) 

increasing resistance lowers voltage.

UNDER FREQUENCY PROTECTION 

Set point:  94 -98% Hz (see note 5) 

UNIT POWER DISSIPATION 

12 watts maximun

BUILD UP VOLTAGE 

4 volts @ AVR terminals

ANALOGUE INPUT 

Maximum input: +/- 5 Vdc  (see note 6)

Sensitivity: 1V for 5% generator volts (adjustable) 

Input resistance: 1 k ohm 

QUADRATURE DROOP INPUT 

10 ohms burden 

Max. sensitivity: 0.07 A for 5% droop OPF

Max. input: 0.33 A 

OVER EXCITATION PROTECTION 

Set point: 75 V dc 

 Time delay: 10-15 seconds (fixed)

ENVIRONMENTAL

Vibration: 20 -100 Hz  50mm/sec  100Hz- 2kHz 3.3g

Operating temperature: -40 lo + 70C (note 7)

 Storage temperature: -55 to +80C

Read More

Regulador de Voltaje para Generador Modelo: 15A

IMPORTANTE:

>Todos los reguladores que vendemos son nuevos importados por nosotros

>Conseguimos cualquier modelo que necesiten contactando por medio de nuestra pagina

Read More

Regulador de Voltaje para Generador Modelo: 12A

Read More